PBX颗粒力学性质对其撞击感度影响的初步研究

利用自行研制的应力测试系统研究了在机械撞击作用下粉状塑料粘结炸药(PBX)的表现。结果表明,由不同的聚氨酯(PU)溶液处理黑索今(RDX)得到的混和炸药PU-RDX,在机械撞击作用下给出的应力-时间曲线是多样的。而且PU-RDX的机械撞击感度随出现第二个应力峰的时间比(指不同的PU-RDX第二应力峰出现时间和仪器在空打时相应时间比)的增大,有下降的趋势。该时间比在一定程度上代表了粉状PU-RDX的塑性。研究在机械撞击作用下PBX的应力-时间特性有助于理解钝感炸药的机理、改进有关的工艺。     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

Global stability analysis of a 90°-bend pipe flow

The present work investigates the stability properties of the flow in a 90°-bend pipe with curvature $\delta =R/R_c=1/3$, with R being the radius of the cross-section of the pipe and $R_c$ the radius of curvature at the pipe centreline. Direct numerical simulations (DNS) for values of the bulk Reynolds number ${\mathit{Re}}_b=U_{b}D/\nu$ between 2000 and 3000 are performed. The bulk Reynolds number is based on the bulk velocity $U_b$, the pipe diameter D, and the kinematic viscosity $\nu$. The flow is found to be steady for ${\mathit{Re}}_b⩽2500$, with two main pairs of symmetric, counter-rotating vortices in the section of the pipe downstream of the bend. The presence of two recirculation regions is detected inside the bend: one on the outer wall and the other on the inner side. For ${\mathit{Re}}_b⩾2550$, the flow exhibits a periodic behaviour, oscillating with a fundamental non-dimensional frequency $\mathit{St}=\mathit{fD}/U_b=0.23$. A global stability analysis is performed in order to determine the cause of the transition from the steady to the periodic regime. The spectrum of the linearised Navier-Stokes operator reveals a pair of complex conjugate eigenvalues with positive real part, hence the transition is ascribed to a Hopf bifurcation occurring at ${\mathit{Re}}_{b,\mathit{cr}}\approx 2531$, a value much lower than the critical Reynolds number for the flow in a torus with the same curvature. The velocity components of the unstable direct and adjoint eigenmodes are investigated, and they display a large spatial separation, most likely due to the non-normality of the linearised Navier-Stokes operator. Thus, the core of the instability, also known in the literature as the wavemaker, is sought performing an analysis of the structural sensitivity of the unstable eigenmode to spatially localised feedbacks. The region located 15° downstream of the bend inlet, on the outer wall, is the most receptive to this kind of perturbations, and thus corresponds to where the instability originates. Since this region coincides with the outer-wall separation bubble, it is concluded that the instability is linked to the strong shear by the backflow phenomena. The present results are relevant for technical applications where bent pipes are frequently used, and their stability properties have hitherto not been studied.     

结构随机激励的响应灵敏度分析

本文建立了有色噪声随机激励的响应协方差矩阵方程,推导了响应灵敏度的计算式,给出了进行灵敏度计算的方法,并作了实例计算。     

计算机模拟升降法试验的研究

介绍了计算机模拟感度试验的原理，运用计算机模拟方法研究了升降法试验的初始参数选择对感度分布参数估计精度的影响，取得了对升降法有利的试验条件。     

Hysteresis and imperfection sensitivity in small ferromagnetic particles

The classical results of Stoner and Wohlfarth for the prediction of hysteresis loops in small ferromagnetic particles are extended to specimens of non-ellipsoidal shape, and shown to be a consequence of micromagnetics. The insensitivity to surface roughness is proposed as a possible explanation of the high coercivity behavior of small particles.

---

Sommario Si deducono i classici risultati di Stoner e Wohlfarth dalla teoria del micromagnetismo, e si dimostra la loro validità per la previsione di cicli di isteresi magnetica anche per particelle di forma non ellissoidale. Viene proposta, quale possibile spiegazione della notevole ampiezza dei cicli di isteresi caratteristici di particelle di piccole dimensioni, l'indifferenza alla presenza di rugosità superficiale.

     

添加剂与RDX的界面作用及对撞击感度的影响研究

研究了石蜡、硬脂酸等添加剂与RDX的界面作用及其对撞击感度的影响。得出添加剂对RDX(Hexogen)的铺展系数越大,钝感效果越好的结论,并获得了铺展系数与特性落高的经验函数关系。     

挤出平缝口模优化设计

挤出平缝口模通常用于加工膜和片材，对产品厚度的一致性有很高要求。本文给出了结合聚合物成型模拟技术、设计灵敏度分析和数值优化技术的口模形状优化设计方法。以最小压力降为目标函数，口模出口处任意点的速率与出口已知速率相对误差的平方和小于容许误差为约束函数，口模形状参数为优化设计变量，给出了目标函数的表达式，推导了日标函数、约束函数对优化设计变量的灵敏度公式。利用灵敏度分析和基于梯度的优化算法即序列二次规划算法(SQP法)求解最优设计参数。通过算例表明，应用该法进行口模优化设计可以减小压力降和口模出口速率变化率。     

多体系统动力学设计灵敏度分析直接微分法

针对受完整约束的多体系统动力学微分／代数方程数学模型动态最优化设计问题，建立了通用的目标函数和约束方程，并以此为基础，用直接微分方法系统地推导出了计算设计灵敏度的通用公式，最后通过平面机械臂模型对理论结果和相应算法进行了验证．